Pcap worksheet: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
$ ethtool -S eth0 // Statistics $ ethtool -S eth0 | egrep '(rx_missed|no_buffer)' // Drop Values $ ethtool -g eth0 ; ethtool -G eth0 rx 4096 tx 4096 // FIFO RX Descriptors $ ethtool -k eth0 ; ethtool -K gro on gso on rx on // Offloading $ ethtool -a eth0 ; ethtool -A rx off autoneg off // Pause Frames $ ethtool -c eth0 ; ethtool -C eth0 rx-usecs 100 // Interrupt Coalescence | $ ethtool -S eth0 // Statistics $ ethtool -S eth0 | egrep '(rx_missed|no_buffer)' // Drop Values | ||
$ cat /proc/net/softnet_stats; printf "%d" 0xffff //Backlog Queue Stat $ echo "1" > /proc/sys/net/core/bpf_jit_enable $ sysctl net.core.netdev_max_backlog; sysctl -w net.core.netdev_max_backlog=3000 $ sysctl net.core.wmem_max; sysctl net.core.rmem_max $ sysctl net.core.wmem_default; sysctl net.core.rmem_default $ sysctl net.core.optmem_max $ echo "net.core.netdev_max_backlog=1024" >> /etc/sysctl.conf | $ ethtool -g eth0 ; ethtool -G eth0 rx 4096 tx 4096 // FIFO RX Descriptors | ||
$ ethtool -k eth0 ; ethtool -K gro on gso on rx on // Offloading | |||
$ ethtool -a eth0 ; ethtool -A rx off autoneg off // Pause Frames | |||
$ ethtool -c eth0 ; ethtool -C eth0 rx-usecs 100 // Interrupt Coalescence | |||
$ cat /proc/net/softnet_stats; printf "%d" 0xffff //Backlog Queue Stat | |||
$ echo "1" > /proc/sys/net/core/bpf_jit_enable $ sysctl net.core.netdev_max_backlog; sysctl -w net.core.netdev_max_backlog=3000 | |||
$ sysctl net.core.wmem_max; sysctl net.core.rmem_max | |||
$ sysctl net.core.wmem_default; sysctl net.core.rmem_default | |||
$ sysctl net.core.optmem_max $ echo "net.core.netdev_max_backlog=1024" >> /etc/sysctl.conf | |||
[http://jonschipp.com/talks/pcapworksheet.txt] | |||
Latest revision as of 17:39, 12 November 2013
$ ethtool -S eth0 // Statistics $ ethtool -S eth0 | egrep '(rx_missed|no_buffer)' // Drop Values $ ethtool -g eth0 ; ethtool -G eth0 rx 4096 tx 4096 // FIFO RX Descriptors $ ethtool -k eth0 ; ethtool -K gro on gso on rx on // Offloading $ ethtool -a eth0 ; ethtool -A rx off autoneg off // Pause Frames $ ethtool -c eth0 ; ethtool -C eth0 rx-usecs 100 // Interrupt Coalescence
$ cat /proc/net/softnet_stats; printf "%d" 0xffff //Backlog Queue Stat $ echo "1" > /proc/sys/net/core/bpf_jit_enable $ sysctl net.core.netdev_max_backlog; sysctl -w net.core.netdev_max_backlog=3000 $ sysctl net.core.wmem_max; sysctl net.core.rmem_max $ sysctl net.core.wmem_default; sysctl net.core.rmem_default $ sysctl net.core.optmem_max $ echo "net.core.netdev_max_backlog=1024" >> /etc/sysctl.conf