Audiocodes tunneling

How to set voipmonitor

Basic options

Following options needs to be enabled in the sniffer service configuration in /etc/voipmonitor.conf for audiocodes packets procssing

audiocodes           = yes 
#choose which transport protocol will be used for audiocodes and enabled the option
udp_port_audiocodes  = 925
tcp_port_audiocodes  = 925

Special options

Following options helps you in case that also the pure (non-encapsulated) packets are visible to voipmonitor (of a same call): The options specifies conditions - which rtp/rtcp packets should be assigned to CDR.

audiocodes_rtp  = no/YES/only/only_for_audiocodes_sip
audiocodes_rtcp = no/YES/only/only_for_audiocodes_sip

where the values means:

no                      - means no process rtp/rtcp encapsulated by audiocodes
yes                     - means process rtp/rtcp encapsulated by audiocodes - default YES
only                    - assigns only RTP/RTCP encapsulated by audiocodes to SIP sessions/CDRs (pure RTP packets if observed as well will be skipped)
only_for_audiocodes_sip - means that RTP/RTCP encapsulated will be assigned to a CDR only in case that SIP packets for this call were encapsulated by audiocodes as well