Audiocodes tunneling: Difference between revisions
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
===Special options=== | ===Special options=== | ||
Following options helps you in case that also the pure (non-encapsulated) packets are visible to voipmonitor (of a same call | Following options helps you in case that also the pure (non-encapsulated) packets are visible to voipmonitor (of a same call): | ||
The options specifies conditions which rtp/rtcp packets should be assigned to CDR. | The options specifies conditions - which rtp/rtcp packets should be assigned to CDR. | ||
audiocodes_rtp = no/YES/only/only_for_audiocodes_sip | audiocodes_rtp = no/YES/only/only_for_audiocodes_sip | ||
Revision as of 12:30, 3 May 2023
How to set voipmonitor
Basic options
Following options needs to be enabled in the sniffer service configuration in /etc/voipmonitor.conf for audiocodes packets procssing
audiocodes = yes #choose which transport protocol will be used for audiocodes and enabled the option udp_port_audiocodes = 925 tcp_port_audiocodes = 925
Special options
Following options helps you in case that also the pure (non-encapsulated) packets are visible to voipmonitor (of a same call): The options specifies conditions - which rtp/rtcp packets should be assigned to CDR.
audiocodes_rtp = no/YES/only/only_for_audiocodes_sip audiocodes_rtcp = no/YES/only/only_for_audiocodes_sip
where the values means:
no - means no process rtp/rtcp encapsulated by audiocodes yes - means process rtp/rtcp encapsulated by audiocodes - default YES only - assigns only RTP/RTCP encapsulated by audiocodes to SIP sessions/CDRs (pure RTP packets if observed as well will be skipped) only_for_audiocodes_sip - means that RTP/RTCP encapsulated will be assigned to a CDR only in case that SIP packets for this call were encapsulated by audiocodes as well