Sniffer installation: Difference between revisions

From VoIPmonitor.org
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
VoIP monitor sniffer can be installed in two ways - either as static binary which will run on any Linux distribution with kernels >= 2.6.18 or compiled from sources.  
VoIP monitor sniffer can be installed in two ways - either as static binary which will run on any Linux distribution with kernels >= 2.6.18 or compiled from sources.  


= Static binary =
= Latest Static binary =


Static binary for 32bit or 64bit can be downloaded from http://www.voipmonitor.org/download pages. Step by step for 64bit linux procedure:
Static binary for 32bit,64bit or Arm arch can be downloaded from http://www.voipmonitor.org/download pages.


# Stop sniffer service first,if its running
/etc/init.d/voipmonitor stop
# In case it won't stop, press CTRL+C and use KILL signal to terminate the process with a force:
kill -9 `pgrep voipmonitor`


#download unpack and run install script. If you are upgrading already installed sniffer, answer "no" If to overwrite /etc/voipmonitor.conf.
== Step by step for 64bit linux procedure ==
  wget https://www.voipmonitor.org/current-stable-sniffer-static-64bit.tar.gz --content-disposition --no-check-certificate
  wget https://www.voipmonitor.org/current-stable-sniffer-static-64bit.tar.gz --content-disposition --no-check-certificate
  tar xzf voipmonitor-*-static.tar.gz
  tar xzf voipmonitor-*-static.tar.gz
Line 16: Line 12:
  ./install-script.sh
  ./install-script.sh


  # Now edit configuration file /etc/voipmonitor.conf and run voipmonitor  
 
== Step by step for 32bit linux procedure ==
  wget https://www.voipmonitor.org/current-stable-sniffer-static-32bit.tar.gz --content-disposition --no-check-certificate
tar xzf voipmonitor-*-static.tar.gz
cd voipmonitor-*-static
./install-script.sh
 
 
== Step by step for ArmV6(RPI) linux ==
wget https://www.voipmonitor.org/current-stable-sniffer-static-armv6k.tar.gz --content-disposition --no-check-certificate
tar xzf voipmonitor-*-static.tar.gz
cd voipmonitor-*-static
./install-script.sh
 
 
 
= Older static versions and versions with SS7(wireshark) module =
If you need for any reason to install older version of a sniffer or version including wireshark's SS7 module follow:
 
 
== Install sniffer version of your choice ==
Find voipmonitor*.tar.gz file of your choice at following site https://sourceforge.net/projects/voipmonitor/files/ and use the link for wget command in step by step [https://wiki.voipmonitor.org/doc/index.php?title=Sniffer_installation&action=submit#Step_by_step_for_64bit_linux_procedure above]
 
 
=== Example of wget command for version 20.4.4 with ss7(wireshark) module ===
wget https://sourceforge.net/projects/voipmonitor/files/20.4/voipmonitor-wireshark-amd64-20.4.4-static.tar.gz/download -O voipmonitor-wireshark-amd64-20.4.4-static.tar.gz --content-disposition --no-check-certificate
 
 
 
= Configuration of a sniffer =
 
Now edit configuration file /etc/voipmonitor.conf and run voipmonitor  
  /etc/init.d/voipmonitor start
  /etc/init.d/voipmonitor start
= Systemd script for bringing up voipmonitor service at a boot time =


If your system uses systemd for services management create a [https://wiki.voipmonitor.org/doc/Systemd_for_voipmonitor_service_management systemd startup script]
If your system uses systemd for services management create a [https://wiki.voipmonitor.org/doc/Systemd_for_voipmonitor_service_management systemd startup script]


= Compile shared binary =
= Compile shared binary =

Revision as of 11:48, 14 September 2017

VoIP monitor sniffer can be installed in two ways - either as static binary which will run on any Linux distribution with kernels >= 2.6.18 or compiled from sources.

Latest Static binary

Static binary for 32bit,64bit or Arm arch can be downloaded from http://www.voipmonitor.org/download pages.


Step by step for 64bit linux procedure

wget https://www.voipmonitor.org/current-stable-sniffer-static-64bit.tar.gz --content-disposition --no-check-certificate
tar xzf voipmonitor-*-static.tar.gz
cd voipmonitor-*-static
./install-script.sh


Step by step for 32bit linux procedure

wget https://www.voipmonitor.org/current-stable-sniffer-static-32bit.tar.gz --content-disposition --no-check-certificate
tar xzf voipmonitor-*-static.tar.gz
cd voipmonitor-*-static
./install-script.sh


Step by step for ArmV6(RPI) linux

wget https://www.voipmonitor.org/current-stable-sniffer-static-armv6k.tar.gz --content-disposition --no-check-certificate
tar xzf voipmonitor-*-static.tar.gz
cd voipmonitor-*-static
./install-script.sh


Older static versions and versions with SS7(wireshark) module

If you need for any reason to install older version of a sniffer or version including wireshark's SS7 module follow:


Install sniffer version of your choice

Find voipmonitor*.tar.gz file of your choice at following site https://sourceforge.net/projects/voipmonitor/files/ and use the link for wget command in step by step above


Example of wget command for version 20.4.4 with ss7(wireshark) module

wget https://sourceforge.net/projects/voipmonitor/files/20.4/voipmonitor-wireshark-amd64-20.4.4-static.tar.gz/download -O voipmonitor-wireshark-amd64-20.4.4-static.tar.gz --content-disposition --no-check-certificate


Configuration of a sniffer

Now edit configuration file /etc/voipmonitor.conf and run voipmonitor 

/etc/init.d/voipmonitor start


Systemd script for bringing up voipmonitor service at a boot time

If your system uses systemd for services management create a systemd startup script


Compile shared binary

Please see README.* inside the sources (we recommend to use the static version) 

git clone https://github.com/voipmonitor/sniffer.git
Retrieved from "https://www.voipmonitor.org//doc/index.php?title=Sniffer_installation&oldid=1662"