CountryGrouping

Country grouping

Settings

Country assign is implemented since sniffer 18.2 and GUI 16.11 and it assigns country to SIP source IP / destination IP and to called / caller number included in the first SIP INVITE. For prefix matching you need to set local country in Settings -> common settings:

- international prefixes - if calling to international destinations is prefixed with for example "00" put there 00 - min. international length - if you do not use prefix for calling to international destinations you might want to set here 10 which will treat every numbers longer than >= 10 as international number - local numbers are in - choose to which country belongs number which does not match international prefix or min. international length - trim prefixes - if you are using prefixes to call to special destinations or trunks (like 999 prefix) you should list it there (delimited with space)

CDR

In CDR section you should be able to see country flags in Caller and Called columns next to source and destination IP addresses and next to source / destination numbers.

CDR group panel

There are new grouping options - country by numbers or by ip address (src/dst)

CDR top calls

In CDR group panel tab -> top calls there are also grouping by country src/dst IP / numbers

File:Country cdr group topcalls