Windows rpcapd: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
== Steps for enable live sniffer as a service on Windows == | == Steps for enable live sniffer as a service on Windows == | ||
'' (tested on 8.1 64b, IP 192.168.88.247) '' | '' (tested on 8.1 64b, IP 192.168.88.247) '' | ||
# Instal windows wireshark including wincap driver | |||
# Locate winpcap file (c:\Program Files (x86)\WinPcap) | |||
# In winpcap folder we create config file for 'Remote Packet Capture' service (and set from which IP we will access this service) | |||
rpcapd.exe -s rpcapd.ini -l 192.168.88.243 | rpcapd.exe -s rpcapd.ini -l 192.168.88.243 | ||
press CTRL+C and check existence of file rpcapd.ini | press CTRL+C and check existence of file rpcapd.ini | ||
# edit rpcapd.ini using any text editor | |||
notepad rpcapd.ini | |||
# Start | |||
PC settings->services->remote packet capture->start | PC settings->services->remote packet capture->start | ||
# we can chec | |||
== Steps for enable live capture using rpcap from remote PC == | == Steps for enable live capture using rpcap from remote PC == | ||
'' (tested on linux Wheezy, IP 192.168.88.243) '' | '' (tested on linux Wheezy, IP 192.168.88.243) '' | ||
Revision as of 12:40, 15 October 2014
Steps for enable live sniffer as a service on Windows
(tested on 8.1 64b, IP 192.168.88.247)
- Instal windows wireshark including wincap driver
- Locate winpcap file (c:\Program Files (x86)\WinPcap)
- In winpcap folder we create config file for 'Remote Packet Capture' service (and set from which IP we will access this service)
rpcapd.exe -s rpcapd.ini -l 192.168.88.243 press CTRL+C and check existence of file rpcapd.ini
- edit rpcapd.ini using any text editor
notepad rpcapd.ini
- Start
PC settings->services->remote packet capture->start
- we can chec
Steps for enable live capture using rpcap from remote PC
(tested on linux Wheezy, IP 192.168.88.243)