FAQ

Scalability

How does voipmonitor scale?

Read this: Scaling

How to clean old data and database?

Read this: Data Cleaning

CDR

What is the red small icon in CDR?

The red icon in those columns signalize which side sends BYE first.

How to interpret two charts in the cdr detail?

See this: Graph cheat sheet

Supported architectures

What architectures are tested?

x86 32 and 64, ARMv5 - (if you have error with missing "__sync_fetch_and_sub_8" you have to upgrade GCC compiler to version 4.8)

Configuration

Why I do not see sip packets other then port 5060?

Voipmonitor sniffer by default sniffs packets only on port 5060 from or to. If you need to sniff more SIP ports you need to specify it in configuration. Please see this: Sniffer_configuration#sipport

How to disable timezone check

Go to settings -> System configuration -> Advanced section -> Hide timezone information -> Enable and set to TRUE

Licensing

How to know how many license channels do we need?

You can have unlimited number of phones / endpoints but you need to buy channels according to your maximum number of calls at the same time during peak.

Go to GUI -> Tools -> concurrent calls which will show peaks past 14 days. All multiple legs are already aggregated into single channel so you do not need to buy extra channels in case you have two or more CDR per one real call. The intention is to scale pricing based on real concurrent calls not accounting multiple legs of the same calls.

How does having multiple sensors affect the licensing? If I add a 2-3 remote sensors to the system, would they use the same license pool?

Central GUI calculates connected channels for the whole database but groups all calls legs as a single call so multiple legs are not counted twice etc.

accident / unwanted spikes

If your license is blocked due to high spike (accident / hack whatever) you need to delete those CDR from database via the GUI (filter those calls and in toolbar use delete buttons) and then try to unblock the license or run "php /var/www/html/php/run.php saveCallStatistics". If you do not want to delete them and you will have higher channels than your license for two consecutive days your license will be blocked after 14 days - you need to upgrade to higher channels license which you can do on voipmonitor.org portal.

DTMF

You can enable DTMF RFC2833 or DTMF SIP INFO in voipmonitor.conf by enabling:

dtmf2db = yes

You can also enable DTMF inband detection (only for G.711) by enabling (it will take some CPU)

inbanddtmf = yes

Bulk download of pcaps or audio (wav/ogg)

Read this: download of pcap files / audio files using GUI's api

Batch download of an audio from CDRs for more then 1000 CDRs

Read this: Batch download of audio for 1000+ CDRs

GeoIP location services

Read this: order of GeoIP processing

Self signed certificate

Read this: Enable SSL/TLS + self signed certificate for http server

Corrupted GUI installation, how to reinstall the GUI

Read this: Re-install_the_GUI

Bad sniffer version, how to reinstall the sniffer to latest version

Read this: Latest_sniffer

What does Audit log cover

It covers these actions of users in the GUI:

• download wav
• download pcap
• play wav
• show fax
• batch download
• filter CDR in form
• login
• logout

Precision for CDRs datetime

by default voipmonitor stores CDRs in seconds precision. If you need to have in CDR view calldate in milliseconds precission folow next how to how to enable milliseconds precision

PCI compliance

Voipmonitor is PCI compliance ready.

To control what to store to disk / database check [capture rules]

Turn off audio recording and DTMF via RFC2833 globally

To prevent recording audio and DTMFviaRTP see [savertp=header]

To prevent recording RTP at all [savertp=no]

To prevent recording just DTMF packets (SIP info/rfc2833) into DB and into spooldir (pcaps)

dtmf2db = no
dtmf2pcap = no

Turn off audio recording selectively

With savertp=yes in /etc/voipmonitor.conf you can disable audio recording only for some IPs / tel.numbers / SIP domains or any SIP header values [SAVE RTP=OFF|HEADER]

Turn on audio recording selectively

With savertp=no|header in /etc/voipmonitor.conf you can enable audio recording only for some IPs / tel.numbers / SIP domains or any SIP header values [SAVERTP=ON] using capture rules.

Turn off DTMF storing to db selectively

With dtmf2db=yes in /etc/voipmonitor.conf you will force sniffer to store DTMF it detects (RF2833/SIP INFO) into db. If you want to not store the DTMF detected in call into CDR for some IPs / tel.numbers / SIP domains or any SIP header values, create capture rule and set there record DTMF=OFF or record DTMF=only pcap - in case you want DTMF packets to be stored into pcap but not to db.

Turn off DTMF storing to pcap selectively

With savertp=yes and savesip=yes in /etc/voipmonitor.conf you will force sniffer to store DTMF(RF2833/SIP INFO) it detects into pcap. If you want to not store DTMF detected into pcap for some IPs / tel.numbers / SIP domains but you still need to collect SIP and RTP for these calls, create capture rule and set there record DTMF=OFF or record DTMF=only db.

Turn off DTMF storing to pcap and DB selectively

If you want to not store the DTMF detected in call's pcap for some IPs / tel.numbers / SIP domains or any SIP header values, create capture rule and set there record DTMF=OFF. (DTMF via SIP info and DTMF RFC2833) will not be stored to packets records, and to db.

Disable spying on live calls

You can disable possibility of GUI to do live spying on calls that uses g711 codec, in the sniffers config set option liveaudio=no

How to enable milliseconds precision

How_to_enable_milliseconds_precision

Register packets

By default is collecting of register packets disabled. You can enable it with option sip-register=yes in /etc/voipmonitor.conf and service restart. More reading in [in register doc]

Where are Active registers stored?

Unlike table register state and register failed, there is no table in database for active registrations - you need to ask api of the voipmonitor sniffer service for list of registers

Here is [simple example script] that lists all active registractions if sipcallerip is matching the only argument

Geek's/Developer's corner

Read this: Internal_support_hints

.